Skip to content

Resend an invitation

POST
/reseller/v1/domains/{domainId}/invites/{inviteId}/resend
curl --request POST \
--url https://api.nsin.cloud/reseller/v1/domains/1/invites/1/resend \
--header 'Authorization: Bearer <token>'

Sends the invitation email again — email only, never SMS, and always to the invited address. It is one of the few messages about a client’s domain that does not reach you: the invite mail bypasses the notification choke point where the reseller redirect lives, so the third party you are inviting receives it directly.

This is not a re-send of the same link. The token is rotated and the expiry reset to the default TTL (seven days unless DOMAIN_INVITE_TTL_HOURS says otherwise, discarding whatever expires_in_hours the invite was created with), and both are saved before the mail is attempted. An SMTP failure therefore answers 500 with the previously mailed link already dead — recover by listing the invites again and handing over the fresh link, not by assuming nothing happened.

Only a live invitation can be resent: revoked, expired or already accepted is 400.

domainId
required
integer

Must belong to a client of the caller, or the response is 403.

inviteId
required
integer

The customer API’s response for the equivalent endpoint, unchanged.

These operations mount the SAME Go handlers the customer panel calls, so the body shape is defined there and is deliberately not restated here — a second copy of the DNS record or rule schema is a second thing to keep in step, and the copy is always the one that goes stale. See openapi.yaml.

Media type application/json
object
key
additional properties
any
Example generated
{}

Missing, malformed, expired, or revoked credential.

Media type application/json

Every error body carries error, a human-readable sentence. Some also carry code, a stable machine-readable reason — branch on that, never on the sentence, which is prose and gets reworded.

object
error
required
string
code

Present only on the failures worth branching on, and deliberately not an exhaustive enum: treat a code you do not recognise as if it were absent and fall back to the status code.

The ones that exist today:

  • credit_limit_reached — 402 from POST /services and POST /services/{serviceId}/change-plan. Your wallet, not the client’s: funding the purchase would take you past your overdraft (default 0, i.e. past zero). Top up; do not credit the client.
  • domain_disabled — 409 from a configuration write on a disabled domain (records, rules, cache, SSL, members, settings). The domain is read-only until POST /domains/{domainId}/enable.
  • unknown_rule_type — 404 from the rules paths when ruleType is not one of the documented values. You get this rather than an empty array, so a typo cannot read as a rule set that happens to be empty.
  • rate_limited — 429 from any route. Keyed per credential, so one runaway integration cannot lock its owner out of the dashboard.
  • session_check_failed — 503, and only on calls made with a dashboard session JWT. The session could not be verified, which is not the same as knowing it is revoked, so it is retryable and the session survives. Machine tokens never see this.
string
Example
{
"error": "forbidden",
"code": "credit_limit_reached"
}

No such resource.

Media type application/json

Every error body carries error, a human-readable sentence. Some also carry code, a stable machine-readable reason — branch on that, never on the sentence, which is prose and gets reworded.

object
error
required
string
code

Present only on the failures worth branching on, and deliberately not an exhaustive enum: treat a code you do not recognise as if it were absent and fall back to the status code.

The ones that exist today:

  • credit_limit_reached — 402 from POST /services and POST /services/{serviceId}/change-plan. Your wallet, not the client’s: funding the purchase would take you past your overdraft (default 0, i.e. past zero). Top up; do not credit the client.
  • domain_disabled — 409 from a configuration write on a disabled domain (records, rules, cache, SSL, members, settings). The domain is read-only until POST /domains/{domainId}/enable.
  • unknown_rule_type — 404 from the rules paths when ruleType is not one of the documented values. You get this rather than an empty array, so a typo cannot read as a rule set that happens to be empty.
  • rate_limited — 429 from any route. Keyed per credential, so one runaway integration cannot lock its owner out of the dashboard.
  • session_check_failed — 503, and only on calls made with a dashboard session JWT. The session could not be verified, which is not the same as knowing it is revoked, so it is retryable and the session survives. Machine tokens never see this.
string
Example
{
"error": "forbidden",
"code": "credit_limit_reached"
}

Something failed on our side. The body carries a human sentence and never an internal detail — a live sweep of this API once returned dial tcp 127.0.0.1:9000: connect: connection refused, which is our topology rather than an error message. That is now impossible.

Distinguish it from 503. A 503 means a dependency is down and the identical request will succeed later, so retry it. A 500 means the request hit a genuine fault: retrying it unchanged will fail the same way, and it should be reported with the X-Request-Id from the response header.

Declared on every operation because every operation can reach it. It was previously declared on exactly one, which left a generated client with no branch for the answer it is most likely to be surprised by.

Media type application/json

Every error body carries error, a human-readable sentence. Some also carry code, a stable machine-readable reason — branch on that, never on the sentence, which is prose and gets reworded.

object
error
required
string
code

Present only on the failures worth branching on, and deliberately not an exhaustive enum: treat a code you do not recognise as if it were absent and fall back to the status code.

The ones that exist today:

  • credit_limit_reached — 402 from POST /services and POST /services/{serviceId}/change-plan. Your wallet, not the client’s: funding the purchase would take you past your overdraft (default 0, i.e. past zero). Top up; do not credit the client.
  • domain_disabled — 409 from a configuration write on a disabled domain (records, rules, cache, SSL, members, settings). The domain is read-only until POST /domains/{domainId}/enable.
  • unknown_rule_type — 404 from the rules paths when ruleType is not one of the documented values. You get this rather than an empty array, so a typo cannot read as a rule set that happens to be empty.
  • rate_limited — 429 from any route. Keyed per credential, so one runaway integration cannot lock its owner out of the dashboard.
  • session_check_failed — 503, and only on calls made with a dashboard session JWT. The session could not be verified, which is not the same as knowing it is revoked, so it is retryable and the session survives. Machine tokens never see this.
string
Example
{
"error": "forbidden",
"code": "credit_limit_reached"
}